Skip to content

Sample submission guidelines

Preparing and shipping samples

Quality samples in, quality data out: packaging, labeling, shipping and minimum requirements for every service.

Samples are pseudonymized. Data is hosted in the EU, with backups in France. Security and confidentiality. Download the full PDF ↓ Sample storage flyer (PDF) ↓

Key points

  • Dry ice for RNARNA and frozen tissue: liquid nitrogen, then dry ice only. Ice packs are not sufficient.
  • Weekday arrivalThe parcel must arrive on a business day. No weekend delivery.
  • Turnaround in business daysIt starts at GO, after the visual check on reception.

Five steps, from shipping to GO

  1. 1

    Before you ship

    • Before shipping: submit the Sample Submission Form in your client portal; the laboratory is notified in your project, so your samples are registered on arrival.

    Project on quote

    Form submitted in the client portal before you ship; a printed copy goes in the package. Sample names match the tube labels exactly, in name and in quantity. Add any QC data you already have: concentration, OD ratios, RIN.

    Shop reorder

    Your order already carries the service, the validated setup and your reference. The tube list is entered with the order itself in the client portal; put a printed copy in the package.

    Sending raw material rather than extracted nucleic acids? Our Sample extraction & quality control platform handles it; see the protocols.

  2. 2

    Packaging

    • 1.5 mL tubes where possible, sealed with parafilm, inserted into 50 mL tubes (or another rigid support) padded with cotton or foam, so they cannot be crushed in transit.
    • Large-scale projects: well-sealed 96-well semi- or fully-skirted PCR plates, or strip-tubes with individually attached caps. Every well is sealed with an adhesive sheet or foil; cushion the plate in a sturdy box.
    • Blood: 5 to 10 mL plastic anticoagulant collection vessels, wrapped in bubble wrap, in a rigid box.
    • Plasma and serum: frozen, in aliquots rather than a single tube, so that no aliquot is thawed more than once. Tell us the time between collection and centrifugation, and the number of freeze-thaw cycles already undergone.
    • Cells and bacterial cultures: contact us before freezing; the protocol depends on whether the material must remain viable on arrival.
  3. 3

    Labeling

    • Top of each tube lid: four alphanumeric characters at most (e.g. 4B01).
    • Full sample name on the top and on the side of the tube.
    • Black permanent marker, never an oil pen directly on the tube wall.
  4. 4

    Shipping

    SampleShipping
    DNA precipitated in 70% ethanolRoom temperature
    DNA in water or TE bufferBlue ice
    RNA and frozen tissueDry ice Snap-frozen in liquid nitrogen. Ice packs are not sufficient for RNA.
    PlatesBlue ice / Dry ice Samples stay frozen throughout transit.
    • The amount of dry ice needed depends on season, transit time and foam box thickness.
    • Recommended carriers: FedEx, DHL or UPS.
    • Shipping instructions and courier account details are provided once your order is confirmed; requirements vary by service.
  5. 5

    Reception and GO

    GENXMAP SAS, laboratory
    IHU Méditerranée Infection
    19-21 boulevard Jean Moulin
    13005 Marseille, France
    • Weekday delivery only: we cannot take delivery at weekends.
    • On arrival: visual check, then GO. Your turnaround starts at that point.
    • Standard 4–6 weeks · Priority 2–4 weeks, in business days. Routine services: 3 business days, for example genotyping once the line is validated.
    • We reply within 2 business days. See turnaround times.

DNA sequencing

These requirements apply to our Genomics platform.

Solvent
DNase-free water, elution buffer or 10 mM Tris pH 8.0
Purity
OD260/280 as close to 1.8–2.0 as possible · OD260/230 of about 2.0–2.2
Quality
RNase-treated, no degradation or contamination
Shipping
Ice packs

Concentrations measured by fluorometry (Picogreen, Qubit, RiboGreen). With spectrophotometry (e.g. Nanodrop), increase them by roughly 2×.

ServiceSampleRecommendedMinimumMin. concentration
Whole Genome SequencingGenomic DNA≥ 500 ng200 ng10 ng/µL
Whole Genome Sequencing (PCR-free)Genomic DNA≥ 1 µg500 ng20 ng/µL
Whole Exome SequencingGenomic DNA≥ 500 ng100 ng10 ng/µL
16S / 18S / ITS SequencingGenomic DNA—≥ 10 ng—

The 16S/18S/ITS row is delivered through our Metagenomics platform.

RNA sequencing

These requirements apply to our Transcriptomics platform (bulk RNA-seq; RT-qPCR validation is covered under targeted quantification below).

Solvent
RNase-free water, RNA stabilization reagent or 10 mM Tris pH 8.0
Purity
DNA-free total RNA · A260/A280 ≥ 1.8 · A260/A230 ≥ 1.8 · RIN > 7
Shipping
Dry ice

Concentrations measured by fluorometry (Picogreen, Qubit, RiboGreen). With spectrophotometry (e.g. Nanodrop), increase them by roughly 2×.

ServiceSampleRecommendedMinimumMin. concentration
Whole Transcriptome / LncRNA SequencingTotal RNA≥ 3 µg1 µg20 ng/µL
Low-Input RNA SequencingTotal RNA≥ 20 ng1 ng50 pg/µL
mRNA SequencingTotal RNA≥ 500 ng200 ng20 ng/µL
Cells≥ 1×10⁶——
Tissue≥ 50 mg10 mg—
MetatranscriptomeTotal RNA≥ 4 µg3 µg50 ng/µL
Cells≥ 5×10⁶——
Environmental samples≥ 1.5 g——
Extracellular vesicle and exosome RNA sequencingTotal RNA≥ 100 ng—20 ng/µL
Cell supernatants≥ 15 mL——
Serum, plasma≥ 1 mL——

Extracellular vesicle and exosome RNA sequencing covers cargo analysis on our Extracellular vesicles and exosomes platform. EV isolation and characterization (NTA) use the same starting biofluid volumes; confirm the exact volume with us if you need isolation only, without RNA-seq.

Degraded or FFPE material: DV200

RIN assumes intact RNA and stops being informative on archival, FFPE or otherwise fragmented samples. For those we read DV200 instead, the share of fragments longer than 200 nucleotides.

  • > 70%Behaves like intact RNA
  • 50–70%Routine
  • 30–50%Still works, but needs more input and a library chemistry that does not rely on intact transcripts
  • < 30%We tell you before you ship, not after

Send us the TapeStation or Bioanalyzer trace and we will set the input with you. For any low-biomass or non-standard matrix, where we have not processed your sample type before, we start with a small feasibility batch rather than a blind commitment.

qPCR, digital PCR and genotyping

Covers the Targeted quantification platform (qPCR, digital PCR (dPCR), pathogen-detection assays) and the Genotyping platform (SNP/CNV). Sample prep is lighter than full sequencing, and turnaround is fast.

DNA
SNP genotyping and pathogen-detection assays: same DNA quality bar as sequencing (OD260/280 close to 1.8–2.0, no degradation).
RNA
RT-qPCR: same quality thresholds as RNA sequencing (A260/280 ≥ 1.8, RIN > 7 where applicable).

Line genotyping (PCR)

Routine PCR genotyping of animal lines on our Genotyping platform. These rules are specific to this service.

Samples
Hair (a tuft with the bulbs), ear punch, tissue, 2 to 3 mm phalanx or tail
Storage
4 °C, no freezing
Shipping
Cool pack, never dry ice
Turnaround
3 working days after the receipt GO

Do not freeze genotyping biopsies

The “frozen animal tissue at −80 °C” rule that applies to the other analyses on this page does not apply to line genotyping. For this service, samples are stored and shipped at 4 °C in a cool pack, never on dry ice and never frozen.

Accepted material
Hair (a tuft with the bulbs), ear punch, tissue, 2 to 3 mm phalanx or tail. Already-extracted DNA is not accepted for this service. One type of material per line and per order.
Minimum quantities
3 samples per line and 48 in total per order, all lines combined.
Transit and shipping days
72 hours maximum between sampling and arrival at the laboratory. Ship Monday to Wednesday, never on a Friday or the day before a public holiday.
New line
Order a PCR set-up first, which takes 2 weeks. It requires WT, heterozygous and homozygous controls, plus the sequence or the primers.
Re-run
Free if the failure comes from a technical problem on our side (non-compliant controls). If the controls are compliant, the new analysis is invoiced. Request it within one week of the results being delivered.
Pick-up
Sample pick-up is free from €1,000 excl. VAT of order value, and €30 excl. VAT below that. For a pick-up on day D, the order must be confirmed the day before by 6:00 pm (Paris time); otherwise it moves to the next scheduled pick-up, in line with article 3.4 of our terms of sale.
Responsibility
Ethical responsibility for sampling lies with the client (article 3.1 of the terms of sale).

Protein and proteomics samples

Our Proteomics platform covers label-free LC-MS/MS with LFQ, performed on site on a timsTOF Pro 2 (Bruker).

Workflow
Protein extraction (cells, tissues or other samples), trypsin digestion, LC-MS/MS, label-free quantification and bioinformatics.
Input
Depth-dependent, from targeted panels to deep shotgun profiling: confirmed directly with our laboratory once your project is scoped.
Storage
Cold (4 °C short-term) or snap-frozen at −80 °C; avoid repeated freeze/thaw of lysates.

Not sure how much sample you have vs. need? Tell us your sample type and we will confirm the exact input before you ship anything.

Suggested quantities by sample type

A quick reference if you are not yet sure which service you need. For exact requirements, match your target service against the tables per service.

Sample typeQuantityShipping
Cell1×10⁶ cellsDry ice
Fresh frozen tissue10 mgDry ice
FFPE≥ 4 slides, 5–20 µm, > 150 mm²Room temperature / Blue ice
Viral particles5×10⁹Dry ice
Stool100 mgDry ice
Swabs2 tubes/sample, 1 swab/tubeRoom temperature
Saliva1 mLDry ice / Blue ice
Soil100 mgRoom temperature / Blue ice
Water50 mLRoom temperature / Blue ice
Plasma / serum10 mLDry ice
Whole blood: fresh (EDTA)2 mLBlue ice
Whole blood: frozen (EDTA)4 mLDry ice
Whole blood: PAXgene, frozen2.5 mLDry ice
Whole blood: Tempus RNA tube3 mLDry ice
Bodily fluids: gDNA500 µLBlue ice
Bodily fluids: cell-free DNA500–10,000 µLDry ice

Sampling protocols by sample type

Collection and preservation steps for the most common sample types. Working with something not listed? Ask us: we routinely advise on sample prep before a project starts.

Adherent cells
  1. Check cells under the microscope for good growth condition (normal confluence is around 80%).
  2. Remove the culture medium and wash quickly, twice, with pre-cooled PBS buffer.
  3. Place the dish on ice, add pre-cooled PBS, and scrape cells with a clean cell scraper, tilting the dish so buffer flows to one side. Pipette into a pre-cooled centrifuge tube and centrifuge at 500–600 g, then discard the supernatant.
  4. Snap-freeze in liquid nitrogen and store at −80 °C.
Cell suspension
  1. Gently resuspend cells from the culture bottle/dish with a pipette and transfer to a 15 mL centrifuge tube.
  2. Centrifuge at 400–1000 g, 4 °C, for 5–10 minutes. Discard the supernatant.
  3. Wash the pellet twice with pre-cooled PBS, keep on ice, discard the supernatant.
  4. Snap-freeze in liquid nitrogen and store at −80 °C.
Animal tissue
  1. Immediately after isolation, remove connective and adipose tissue not needed for the study. Cut large samples into small pieces (≤0.5 cm per side).
  2. Rinse quickly with pre-cooled saline or PBS, dry with dust-free paper, and place in a 1.5–2 mL centrifuge tube.
  3. Snap-freeze and store at −80 °C. Divide large samples into aliquots.
Plant & fungal tissue
  1. Wash fresh samples immediately with DEPC water and dry with dust-free paper.
  2. Cut into 1–2 cm or 50–100 mg pieces and place in 2, 15 or 50 mL tubes.
  3. Snap-freeze in liquid nitrogen and store at −80 °C.
Bacterial samples
  1. Collect bacterial liquid into a 50 mL centrifuge tube, spin at 3000–5000 g / 10 min at 4 °C to pellet bacteria, and remove as much culture medium as possible.
  2. Wash twice with 5–10 mL sterile water or PBS, transfer to a 1.5–2.0 mL tube, spin at 1500 rpm / 10 min at 4 °C, discard the supernatant and keep the pellet.
  3. Snap-freeze in liquid nitrogen and store at −80 °C.
Whole blood
  1. Collect into a suitable medium (e.g. QIAGEN PAXgene) following the manufacturer's instructions: >500 µL per tube, 2 tubes per sample.
  2. Fresh samples: store and ship refrigerated with a wet/blue ice package.
  3. Frozen samples: ship overnight, frozen, packed with protective bubble padding, dry ice surrounding all sides.
  4. For PAXgene RNA tubes, collect >2.5 mL blood (expected yield ≈ >3 µg RNA).
Plasma
  1. Draw 10 mL total blood into 5 mL EDTA (purple-top) vessels. Mix gently. Whole blood can hold at 4 °C for up to 1 h before processing.
  2. Centrifuge at 1900 g, 4 °C, 10 min with a bucket-type rotor. Carefully aspirate plasma, discarding the final 500 µL near the interface.
  3. Re-centrifuge the plasma at 3000 g, 4 °C, 15 min, avoiding the sediment.
  4. Sub-package into EP tubes and freeze at −80 °C, avoiding repeated freeze/thaw cycles.
Serum
  1. Collect 10 mL blood into a plain serum tube (no anticoagulant).
  2. Let stand 30 min at room temperature, then 3–4 h at 4 °C until clotted.
  3. Aspirate the pale-yellow serum (~4 mL) into a 15 mL tube and centrifuge at 3000 g, 4 °C, 15 min. Transfer the supernatant to a fresh tube.
  4. Freeze at −80 °C within 15 minutes of centrifugation to avoid repeated freeze/thaw.
PBMC
  1. Collect at least 7.5 mL of blood for isolation.
  2. Resuspend PBMCs in RPMI 1640 + 10% FBS, adjusting concentration to 1×10⁶–1×10⁷ cells/mL.
  3. Centrifuge 10–15 min at 350 × g and discard the supernatant.
  4. Snap-freeze the pellet in liquid nitrogen and store at −80 °C. Pellets need at least 10⁶ cells and should ship on dry ice.
FFPE (formalin-fixed, paraffin-embedded)
  1. Approximately 80 mg of tissue is needed per sample.
  2. Clean the tissue with PBS or saline, then fully immerse in formaldehyde fixative within 30 minutes of sampling. Seal the container with sealing film.
  3. Fix fresh tissue for no more than 24 h (or per pretreatment kit instructions). FFPE blocks/slides can be shipped at room temperature.
Water body / filter membrane
  1. Sample at least 1–2 L of water (slightly turbid water is fine).
  2. Transport at low temperature throughout.
  3. Select filter membrane pore size according to your research target.
  4. After liquid-nitrogen freezing, place in a sterile, RNase-free tube and ship on dry ice.
Urine
  1. Collect in a 15 or 50 mL tube, spin at 300 g, 4 °C, 10 min, and transfer the supernatant to a clean tube without disturbing the sediment.
  2. Spin again at 3000 g, 4 °C, 15 min to remove cells/fragments. Freeze the supernatant at −80 °C before delivery, avoiding repeated freeze/thaw.
Insects
  1. Use a clean, sterile container or 96-well plate. Rinse briefly with sterile PBS if surface decontamination is needed.
  2. Optionally centrifuge at 300 g, 4 °C, 5 min to remove external debris, then carefully remove insects from any liquid medium.
  3. Snap-freeze in liquid nitrogen or at −80 °C, or preserve in RNAlater® (5–10× preservative-to-sample ratio; 4 °C for 24–48 h, then −80 °C for long-term storage).
  4. Avoid repeated freeze/thaw before delivery.

Questions we get asked

Packaging, labeling and delivery

How should I ship RNA and frozen tissue?

Snap-freeze in liquid nitrogen and ship on dry ice. Ice packs are not sufficient for RNA: dry ice only. The amount of dry ice needed depends on the season, the transit time and the foam box thickness. Recommended carriers are FedEx, DHL or UPS, and the parcel must arrive on a weekday.

Direct link to this question
How should I label my tubes?

Write four alphanumeric characters at most on the top of each tube lid (for example 4B01), and the full sample name on the top and on the side of the tube. Use a black permanent marker, never an oil pen directly on the tube wall. Sample names must match the form exactly, in name and in quantity.

Direct link to this question
How should I ship genotyping biopsies?

At 4 °C in a cool pack, never on dry ice and never frozen. Accepted material is hair (a tuft with the bulbs), ear punch, tissue, a 2 to 3 mm phalanx or tail; already-extracted DNA is not accepted. Ship Monday to Wednesday, with 72 hours maximum between sampling and arrival at the laboratory.

Direct link to this question
When should my shipment arrive?

On a weekday: we cannot take delivery at weekends. Submit the Sample Submission Form in your client portal before you ship, so we can register your samples on arrival. Deliver to GENXMAP SAS, IHU Méditerranée Infection, 19-21 boulevard Jean Moulin, 13005 Marseille.

Direct link to this question

Sample quality

My concentrations were measured on a Nanodrop. Do I need to adjust them?

Yes, increase them by roughly 2×. The values in our tables assume fluorometry (Picogreen, Qubit or RiboGreen). If you rely on spectrophotometry, such as a Nanodrop, send about twice the concentration shown, and add any QC data you already have: concentration, OD ratios, RIN.

Direct link to this question
What if my RNA is degraded, or comes from FFPE?

Send us the TapeStation or Bioanalyzer trace and we will set the input with you. RIN stops being informative on archival, FFPE or fragmented samples, so we read DV200 instead, the share of fragments longer than 200 nucleotides. Above 70% behaves like intact RNA; below 30%, we tell you before you ship.

Direct link to this question

Turnaround and data

When does my turnaround start, and how long does it last?

It starts at GO, after the visual check of your samples on reception, not at order. Standard projects take 4–6 weeks and priority projects 2–4 weeks, in working days; routine services take 3 business days once set-up is validated. The date written in your quote is the one that binds us.

Direct link to this question
How do I get my data?

Data is delivered through the secure client portal by default. For large sequencing volumes we use a secure transfer link; on request, we can also deliver to your own cloud (AWS, Google Cloud, DNAnexus) or on a hard drive for very large volumes. Data is hosted in the EU, with backups in France.

Direct link to this question

Not sure which service fits?

Tell us your sample type and biological question, and we’ll scope the right platform.